VR Tuned ECU Tuning Box Kit Porsche 991 Turbo | Turbo S 13-15

Description

Porsche 991 Turbo tuning is now available from
VR Tuned
via our new multi channel
tuning box kit
. The Porsche 991 Turbo and Turbo S are able to make 630bhp from our new Tuning Box Kit. The Siemens SDI9 ECU in the cars cannot be read out because of tuning encryption, so conventional OBDII or bench flash tuning is not possible. Where some tuners are taking matching software ID files and uploading them to the car, this can be dangerous and not allow you to revert back to your true original file. The Tuning Box kit is a simple plug and play solution that allows you to remove the box or plug the jumper back in for stock mode never affecting the ECU identifications itself. Since this is a mult channel tuning box, it works off of boost pressure, manifold pressure, and crankshaft sensor to deliver a very strong increase in horsepower and torque whether in sport or standard mode.
The harness installs in about 1 hour follow the detailed instructions linked below. The 2 pressure sensors are easily accessible from the top of the engine bay and the crankshaft sensor does require the right rear wheel to be removed to gain access behind the compressor inlet pipe. Once clipped in, we connected the tuning box and safely mounted it in-between the air intake snorkels where it would not be as prone to heat or coming loose. The boxes are weather resistance and extremely durable to protect the microprocessor inside.
We tested the
Tuning Box Kit
on our
2014 Porsche Turbo
. The Tuning Boxes were also tested by the manufacture separately in the UK and Germany. Our test was done on a Mustang all wheel drive dyno using 91 octane. With this setup, we typically see a 20-25% drivetrain loss from the stock crank published horsepower numbers of 520bhp on a Turbo and 560bhp on a Turbo S. 93 octane or 98 ron is preferred for maximum power. We tested the car several times doing 3rd gear pulls with traction control off in both standard and sport mode. Because sport works off the EGT sensors in the turbos, it will produce much higher torque but taper off on the top end if you run it back to back to back as these EGT’s increase. Our car was equipped with stock catalytic converters, a high flow
Agency Power muffler
, and a set of our
Agency Power headers
. With the only variable being the tuning box, our baseline numbers were between
436 and 440awhp
with torque between
465 and 477 ft/lbs of torque
.
With the VR Tuned Tuning Box Kit plugged in, we saw
494 to 499 awhp
and
545 to 551 ft/lbs of torque
. This gave us average gains of
60whp and 80ft/lbs of torque
. To validate these tests we did several tests throughout the day with controlled cooling periods, back to back testing, and using standard and sport mode. Once the dyno tests were completed, we test drove the car on the street which was a very noticeable and drastic difference on the acceleration and pull. As a secondary test, we tried out a 0-60mph with our
Performance Box kit
. The car is equipped with 21 inch wheels and Pirelli PZero tires running 36psi at all 4 corners as we did our 0-60 with launch control. Slipping through 1st and 2nd gear, the car still did 3.3 seconds compared to the well tested and controlled factory numbers of 3.4 seconds. This was the product that truly transformed the Porsche 991 Turbo into a beast like previous 997 Turbo models. With the addition of our
Auto Flash kit
, shifting and throttle response can be increased further.
Tuning Box Features
Plug and Play for easy removal to avoid warranty issues
Designed for forced induction vehicles only
Does not lock to vehicle or VIN
Harness has OEM style connectors, no splicing or cutting
Tuning Box features an aluminum weatherproof case
Digital Microprocessor Controlled
Professional Installation Recommended
Proven power gains
Tuning Box cannot eliminate CELs from catless or high flow cat exhaust parts
On the back of the box is a removable cover with dial settings you can adjust. This is to allow small adjustments to the power setting so the box can work correctly in different climate conditions and on different quality fuel.
Download Installation Instructions Here
Horsepower Gains
991 Turbo
Crank Horsepower: 520bhp -> 630bhp
Wheel Horsepower: 440awhp -> 499awhp
Wheel Torque Avg: 477ft/lbs -> 551ft/lbs
991 Turbo S
Crank Horsepower: 560bhp -> 630bhp
Specifications:
Make:
Porsche
Model:
911
Sub Model:
991
Years:
09/2013 – 01/2015
Capacity:
3800
Engineered for boosted cars, these vehicle specific plug and play kits are designed to easily be installed and uninstalled as needed. The harnesses feature OEM plugs that attach to necessary sensors where the pre-mapped tuning box gives your vehicle huge amount of performance gains. Unlike other “piggyback” solutions, these use high quality connections, wires, and casing that are designed to be engine mounted for longevity to the elements. The actual tuning box is housed in a aluminum casing that is weatherproof. These factory plug and play harnesses allow you to remove the kit as needed for warranty purposes.
Each Tuning Box Kit has been engineered and tested to work in even the most extreme environments of altitude, temperature, and driving conditions. If you have any questions in regards to the
VR Tuned ECU Tuning Box Kit for the Porsche 991 Turbo
, please contact one of our Performance Specialists.
Notes:
Performance number gains are quoted based on Engine Power Gains, not wheel horsepower. Testing on the products was done in the UK using 98octane fuel. VRTuned has tested these in-house on several cars and stand behind the Tuning Box Kits work as claimed.
We offer support and warranty on the hardware itself.
We
DO NOT
offer a guarantee from independent dyno tests or support personal installations not done by qualified shops.