KTUNER ECU Flash with Touchscreen Device V2 Honda Civic Si 1.5L Turbo 2017+

Description

The KTunerFlash V2 Unit is the new All-In-One solution from KTuner for your Honda Civic Si 1.5L Turbo.  This tool allows you to flash your ECU to a high performance tuning map as well as revert back to stock.  In addition, KTuner also allows full access to software for those that want to play with custom tuning themselves.  With their dyno proven maps, easy to use flashing device, and ability to customize, the KTuner flashing tool is an amazing product for you!
This package includes multiple starter maps, Factory, 19.5PSI, 21.5PSI, 23PSI, and 19.5/23PSI dual tune activated by the Sport button. Also included are quick adjustments that give you easy levels of control for throttle response, partial throttle boost response, and turbo ramp lag. Pick the combo of settings that’s right for your testing needs!
Performance Gains:
Dyno Testing 23PSI Basemap:
Gains: 56wtq, 35-40whp midrange, 30whp peak to peak. There’s more left in the top end, but we’re staying conservative. Custom tuning can take it to the next level.
Dyno Testing 23PSI Basemap with Flex Fuel Kit (E35):
Gains: 75wtq, 60-65whp midrange, 65whp peak to peak.
What tunes will be included?
Factory Starting Point:
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Factory boost levels
Starter 19.5 PSI:
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag
Improved low-end and midrange torque
Boost raised to 19.5psi after peak torque, whereas factory only targets 19 at the peak RPM of 5700 and then drops off again
Producing a much more sporty feel, better drivability, and additional top end power!
Starter 21.5PSI:
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag with aggressive spool up
Improved low-end and midrange torque
Boost targets raised to 21.5psi
Producing a much more sporty feel, better drivability, and additional top end power!
Starter 23PSI:
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag with aggressive spool up
Improved low-end and midrange torque
Boost targets raised to 23psi
Producing a much more sporty feel, better drivability, and additional top end power!
Starter 19.5/23PSI:
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag with aggressive spool up
Improved low-end and midrange torque
Boost targets 19.5psi in Normal Mode
Boost targets raised to 23psi in Sport Mode
Producing a much more sporty feel, better drivability, and additional top end power!
Other Dual Mode Starter Maps:
Factory Normal/19.5 Sport
Factory Normal/21.5 Sport
19.5 Normal/21.5 Sport
Factory Normal/23 Sport
Notes:
The tune can be ran with 91+ octane fuel.
Gain Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag with aggressive spool up
Improved low-end and midrange torque
Producing a much more sporty feel, better drivability, and additional top end power!
How does the KTuner Touchscreen Work?
The KTunerFlash V2 features a 5″ touchscreen display that can show essential sensor data in real-time as a digital dash display. Though it’s meant as a handheld a simple Dual-T bracket can be added to allow mounting on a variety of inexpensive Dual-T mounts. Through a simple to use touch interface you can choose between different layouts, multiple data items, and even color options on layouts that support color changes.
Via full integration with our KTuner Tuning Software you are able to load the factory tune and multiple custom tunes to the KTunerFlash V2 allowing you to switch tunes without the need for a laptop. Easily flash back to factory with the touch of the screen. If you’re making quick changes or on the dyno you can also flash through the KTunerFlash V2 without having to upload the tune first.
5 Programmable LEDs can be set to show any combination of colors (RGB) and even allow for fading between a start and end color based on your settings. Customizable intensity settings for each breakpoint allow you to fade in or out at your desired breakpoints. Warnings allow an LED to flash rapidly to easily grab your attention. This can be used for shiftlights, an overheat warning, overboost warning, and other options.
KTunerFlash V2 features On Board Logging With Programmable On/Off Parameters for recording datalogs without a laptop! We allow up to 1000 datalogs to be recorded with no limit on length, so you’ll never miss a beat. Quickly enable or disable on board logging from the menu and once your parameters are met it will record all essential data for later review.
KTunerFlash V2 has built-in bluetooth integration. With a supporting app, like TunerView for Android ($5), you are also able to add additional gauge integration for real-time data display and more. The TunerView app allows you to use your Android device as a video camera and overlay real-time data from the KTunerFlash V2. 
About the KTuner Tuning Software:
The KTuner software is a tabbed layout including a drop down list of parameters. This allows easy maneuvering around parameters and tuning layouts.  
Free to Download Here
.
Product Features:
5″ Touch Screen Display.
Real-Time data display with multiple layouts.
Easy to navigate menu system for settings.
Store multiple tunes, including factory. Flash saved tunes without the need for a laptop.
Note: Tunes are still created with the KTuner PC software.
On Board Logging, record datalogs without the need for a laptop.
5 Programmable LEDs (RGB) for shift lights, warnings, etc.
Bluetooth connectivity for peripherals and the 
TunerView Android app
.
This unit is locked to one ECU and allows you to alter the settings in your ECU.
Return to factory at any time and unlock the unit to resell.
This allows datalogging and reflashing right over your factory OBD2 port!
Extended data parameters available on certain vehicles.
Diagnose any Honda/Acura CAN vehicle, even when already locked to a vehicle.
KTuner uses USB connectivity for fast data transfers.
Current Supported ECUs:
For latest KTuner Civic Si 1.5T Updates – 
Click Here
North America Civic Si 1.5T
 
 
2017-2018
MT
37820-5AM-A01 through A03
 
 
37820-5AM-C01 through C03
2019
 
37820-5AM-A11 through A12
 
 
37820-5AM-C11 through C12
Help Videos: