KTUNER ECU Flash with Touchscreen Device V2 Honda Accord 1.5L Turbo 2018+

Description

The KTunerFlash V2 Unit is the new All-In-One solution from KTuner for your Honda Accord 1.5L Turbo.  This tool allows you to flash your ECU to a high performance tuning map as well as revert back to stock.  In addition, KTuner also allows full access to software for those that want to play with custom tuning themselves.  With their dyno proven maps, easy to use flashing device, and ability to customize, the KTuner flashing tool is an amazing product for you!
Performance Gains
:
Stage 1 – +30whp | +40ft/lbs
Stage 2 – +55whp | +58ft/lbs
What tunes will be included?
Stage 1 (CVT and MT):
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag
Improved low-end and midrange torque
Boost level adjusted
Smooth torque delivery throughout the rev range
Up to 38 lb-ft of torque increase over factory
Up to 30whp increase over factory
17whp peak-to-peak
Producing a much more sporty feel, drivability, and additional power throughout the RPM range!
Stage 1 Dual Tune (CVT and MT):
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag
Improved low-end and midrange torque
Factory boost targets with low RPM dampening in ECO mode
Boost level adjusted in normal and sport
Up to 40 lb-ft of torque increase over factory
Up to 30whp increase over factory
17whp peak-to-peak
Smooth torque delivery throughout the rev range
Producing a much more sporty feel, drivability, and additional power throughout the RPM range!
Stage 2 (CVT and MT):
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag
Improved low-end and midrange torque
Boost level adjusted
Up to 58 lb-ft of torque increase over factory
Up to 55whp increase over factory
32whp peak-to-peak
Producing a much more sporty feel, drivability, and additional power throughout the RPM range!
Stage 2.0 Dual Tune (CVT and MT):
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag
Improved low-end and midrange torque
Factory Boost targets with low RPM dampening in ECO mode
Boost level adjusted in normal and sport
Up to 58 lb-ft of torque increase over factory
Up to 55whp increase over factory
32whp peak-to-peak
Producing a much more sporty feel, drivability, and additional power throughout the RPM range!
Stage 2.1 Dual Tune (CVT and MT):
Improved throttle response
Removed throttle dampening on low end, better performance off the line
Reduced turbo lag
Improved low-end and midrange torque
Boost level adjusted
Stage 1 Boost targets in ECO mode
Up to 40 lb-ft of torque increase over factory
Up to 30whp increase over factory
17whp peak-to-peak
Stage 2 Boost targets in Normal/Sport
Up to 58 lb-ft of torque increase over factory
Up to 55whp increase over factory
32whp peak-to-peak
Producing a much more sporty feel, drivability, and additional power throughout the RPM range!
Notes:
Running 91+ will give the best results
.
Flash back to stock at anytime.
How does the KTuner Touchscreen Work?
The KTunerFlash V2 features a 5″ touchscreen display that can show essential sensor data in real-time as a digital dash display. Though it’s meant as a handheld a simple Dual-T bracket can be added to allow mounting on a variety of inexpensive Dual-T mounts. Through a simple to use touch interface you can choose between different layouts, multiple data items, and even color options on layouts that support color changes.
Via full integration with our KTuner Tuning Software you are able to load the factory tune and multiple custom tunes to the KTunerFlash V2 allowing you to switch tunes without the need for a laptop. Easily flash back to factory with the touch of the screen. If you’re making quick changes or on the dyno you can also flash through the KTunerFlash V2 without having to upload the tune first.
5 Programmable LEDs can be set to show any combination of colors (RGB) and even allow for fading between a start and end color based on your settings. Customizable intensity settings for each breakpoint allow you to fade in or out at your desired breakpoints. Warnings allow an LED to flash rapidly to easily grab your attention. This can be used for shiftlights, an overheat warning, overboost warning, and other options.
KTunerFlash V2 features On Board Logging With Programmable On/Off Parameters for recording datalogs without a laptop! We allow up to 1000 datalogs to be recorded with no limit on length, so you’ll never miss a beat. Quickly enable or disable on board logging from the menu and once your parameters are met it will record all essential data for later review.
KTunerFlash V2 has built-in bluetooth integration. With a supporting app, like TunerView for Android ($5), you are also able to add additional gauge integration for real-time data display and more. The TunerView app allows you to use your Android device as a video camera and overlay real-time data from the KTunerFlash V2. 
About the KTuner Tuning Software:
The KTuner software is a tabbed layout including a drop down list of parameters. This allows easy maneuvering around parameters and tuning layouts.  
Free to Download Here
.
Product Features:
5″ Touch Screen Display.
Real-Time data display with multiple layouts.
Easy to navigate menu system for settings.
Store multiple tunes, including factory. Flash saved tunes without the need for a laptop.
Note: Tunes are still created with the KTuner PC software.
On Board Logging, record datalogs without the need for a laptop.
5 Programmable LEDs (RGB) for shift lights, warnings, etc.
Bluetooth connectivity for peripherals and the 
TunerView Android app
.
This unit is locked to one ECU and allows you to alter the settings in your ECU.
Return to factory at any time and unlock the unit to resell.
This allows datalogging and reflashing right over your factory OBD2 port!
Extended data parameters available on certain vehicles.
Diagnose any Honda/Acura CAN vehicle, even when already locked to a vehicle.
KTuner uses USB connectivity for fast data transfers.
Current Supported ECUs:
For latest KTuner Accord 1.5L Turbo Updates – 
Click Here
North America
 
 
2018
MT
37820-6A0-A01 through A06
 
CVT
37820-6A0-A61 through A66
 
 
37820-6A0-A71 through A76
 
 
37820-6A0-A81 through A86
 
 
37820-6A0-C71 through C76
Help Videos: