Description
This is the ultimate air cleaner kit for S2000 that not only forcibly introduces fresh air into the F20C, but also lowers the intake air temperature and improves the accelerator response by creating an air reservoir in the air chamber.
By improving the intake efficiency, exhaust efficiency, and ignition efficiency in a well-balanced manner, engine characteristics can be further extracted and power can be increased. J’s Racing S2000 Carbon Tsuchinoko Chamber has a high “intake duct” dust collection capability that forcibly introduces fresh air from the bottom of the bumper. Nevertheless, “High performance air cleaner & box with low intake resistance, by making these S2000 exclusive design, it becomes possible to inhale the air whose temperature is significantly lower than normal, that is, high density. Also, by introducing a “Tsuboko-shaped air chamber”, the air accumulated in the chamber is led to the throttle at once when the accelerator is turned off and accelerator response can be significantly improved.
This is S2000’s ultimate air cleaner kit that is effective in all speed ranges from the street to the circuit.
Fitment:
Honda S2000 AP1 00-03
Notes:
The parts for the installation and dedicated air filter are included in the kit.
Incision of bonnet back, genuine air guide, genuine bumper grill is necessary.
Since professional technology is required for installation, J’s Racing recommend entrusting it to a pro shop.
Although there is a hole for draining water, avoid running in situations where a large amount of water is sucked in at once.
It is not possible to guarantee any engine trouble or accident (including accessories) after installation. Some third-party strut tower bars can interfere with their handling. You can use J’s Racing tower bar without any problem.
J’s Racing Type-V hood does not require any modification.
A part of the stock radiator shroud has to be cut.
A model without the bleed nipple is available for the secondary air / low-by piping.
The stock black performance rod on the back side of the beam has to be removed.
Reviews
There are no reviews yet.